Fiber proof testers are designed to use a set load to SZ Stranding Line in order to test the strength of the spliced Fiber. Our Fiber proof testers are available in both linear and rotary styles, for both proof and stress testing. Fiber proof testers are accessible for solitary mode, multimode, and polarization-maintaining fibers. Pick from devoted, stand alone systems or multi-purpose styles which are also competent at stripping, cleaning, cleaving, splicing, and recoating.

Fiber Recoaters with Proof Testers offer easy, integrated answers to recoat and test fusion-spliced fibers. The Fiber recoating procedure restores the barrier covering to a removed Fiber, providing much more versatility when compared to a warmth-shrink protection sleeve, enabling it to be handled and coiled without damaging the combination-spliced section. The incorporated linear or rotary Proof tester allows customers to right away check a recoated Fiber using a pre-decided weight and determine the long-term reliability of the Fiber. Due to their capability to recover a combination-spliced Fiber to near original condition, these systems are best for applications like undersea visual Fiber cables, submarine interaction wiring, Fiber lasers, or Distributed Bragg Reflector (DBR) lasers.

The process starts off with the fusion-spliced portion of Fiber becoming placed in the center of the mold assembly (see image to the right). Once set constantly in place, inserts in the Fiber blocks secure the spliced Fiber in position. Recoat materials is motivated into the cavity and then Ultra violet-treated. The recoated Fiber can then be tested by tugging into it up to and including pre-determined weight.

Recoater and Mold Set up Options – Recoaters can be purchased with either a computerized or manual mold assembly. The automatic mold set up features pneumatic charge of the mold plates and is also optimized for high-volume manufacturing applications. Handbook mold assemblies, on the other hand, use hinged mold dishes which provide more flexibility and are ideal for low-volume production or R&D programs. An automated or manual volumetric dispensing pump and injection product is utilized to inject the recoat material in to the mold cavity.

The Optical Fiber Proof-Testing Machine arrives standard using a mold assembly for Ø430 µm covered materials; For the manual recoaters (Product #s PTR206, PTR206B, PTR307, and PTR307B), the mold assembly comes separately in order that customers can choose the right mold covering size for their program. Custom mold covering sizes are available as much as Ø900 µm. Pre-setting up the mold assembly on the manufacturer is additionally available. Contact Technology Assistance to learn more about custom molds or factory assembly.

We offer both higher-index (Item # AB950200) and reduced-index (Item # PC373) recoat components to be used during these recoaters. Recoaters with handbook shot pumping systems (Item #s PTR206B and PTR307B) are appropriate for each kinds of recoat material; all the other recoaters are appropriate for our prime-index materials only. Our handbook recoaters having an automatic shot system (Product #s PTR206 and PTR307) can be personalized to work with both reduced- and high-directory recoat materials; please contact Tech Assistance to learn more.

Proof Tester Options – The PTR206, PTR206B, and PTR208 Fiber Recoaters include a built-in linear Proof tester, which takes the Fiber up to and including predetermined load (20 N) then produces it. The linear Proof tester uses exactly the same Fiber holding blocks since the recoater and so the Fiber does not have to be moved just before screening. The PTR307 and PTR307B Fiber Recoaters have a built-in rotary Proof tester, which can perform both Proof and stress assessments (?89 N). One set of Proof check grips is provided; replacement Proof check grips can be found listed below in packs of 10. Each screening process is fully automated using the provided handset or tablet control, enabling qyjflh user to pick parameters including the weight, the pace where the burden is applied, as well as the hold time.

Inserts for Fiber Holding Blocks – As well as the above, we offer a number of inserts to use in the Fiber holding obstructs of the recoaters in order to support a broad range of Optical Fiber Coloring Machine coating diameters. For recoaters with a rotary Proof tester, the inserts are suitable for Fiber coating diameters in a range from 125 µm to 900 µm. For recoaters using a linear Proof tester, the inserts include a range for Fiber coatings from Ø250 µm to Ø900 µm.

SZ Stranding Line – Useful Facts..

We are using cookies on our website

Please confirm, if you accept our tracking cookies. You can also decline the tracking, so you can continue to visit our website without any data sent to third party services.